SinterMax T1800

Digital Dental

SinterMax T1800

  • Digital Dental-SinterMax T1800 Dental Zirconia Oven

    Digital Dental is one of the leading makers of low-cost traditional sintering ovens as well as a pioneer in microwave sintering technologies.

    The Digital Dental-SinterMax T1800 is the hottest and fastest zirconia sintering oven available. The 1800°C molybdenum disilicide elements are super clean unlike other elements that discharge gasses that can discolor zirconia.

  • Super Fast Ramp Speeds

    Due to fast 30°C per minute ramp-speeds, the T1800 can achieve sintering temperatures in as fast as one hour.

  • User Friendly Programmable Display

    The SinterMax T1800 comes with 15 default four stage firing programs for most common Zirconia materials, ranging from 1350°C to 1800°C final temps with a variety of ramp-up and hold times. Additionally, the user can add up to five more eight-stage programs.

  • High Quality High Efficiency Muffle

    The muffle materials are of the highest quality and never stain the restoration. The muffle adapts to the refractory fiber to save 30% in energy costs, or up to 80% compared to long-cycle overnight ovens.

  • Molybdenum Disilicide Heating Elements

    The 1800°C industrial molybdenum disilicide heating elements last longer than traditional metal heating elements due to a protective quartz layer that forms on the surface during operation.

  • Features

    • Super-fast 2-hour or 4-hour cycles
    • Super-clean elements and muffles
    • 15 fixed and 5 custom programs
    • Bottom loading lift tray design
    • Accurate electronic temperature sensor
    • Active current monitoring
    • 30-80% lower energy costs

  • Specifications

    • Size: 23”W x 33”H x 17”D
    • Weight: 214 lbs
    • Chamber size: 4.6” D x 5.1” H
    • Power: 220V
    • 30°C per minute ramp rate
    • 1800°C maximum temperature
    • Molybdenum disilicide heating elements
    • Includes extra heating element

Get a Quote

Contact us at (708) 746-5730 or fill out the form to learn more.

  • This field is for validation purposes and should be left unchanged.